Hose-correct methods
1.Different rubber hose can only carry their specific media;When the bending radius of the high pressure hose is too small, suggest to choose a right angle joint.
2.Strictly prohibited to use in a work environment that exceeds the work pressure range.
3.The medium temperature should not exceed the factory requirement.
4.Keep away from fire, heat;Can install sleeve insulation equipment,avoid thermal deterioration of the hose.
5.Reducing friction to minimize wear,Take protective measures when necessary to avoid blowouts.
6.Do not twist the hose during installation.
7.The hose installation should avoid the tension state
8.Keep the hose inside clean
9.Leakage, rupture, drum pack, joint card rust, wire breakage, rubber layer aging cracks, etc., must be replaced immediately.
Hose-maintain
1.Inspection: after use, the rubber hose must be inspected to ensure that there is no structural damage.
2.Pressure: if the rubber hose is subjected to severe pressure or the outer layer of the rubber hose contacts with the liquid for a long time,recommend the hydraulic test .
3.The storage of rubber hose must avoid mechanical pressure;The rubber hose must be stored horizontally
4.Rubber hose can not be exposed to solvent,fuel,oil,grease,unstable chemical substance, acid, disinfectant or general organic liquids.Any type of rubber can be damaged after contact with certain materials or mixtures.It includes manganese, iron, copper and its alloys.
5.Recommended storage temperature:10℃-25℃。The rubber hose shall not be stored at temperatures above 40 ℃or below 0 ℃。
6.Avoid direct sunlight or strong artificial light
7.A rubber hose should be properly wrapped or stored in a closed container to avoid exposure to the air。Storage room must not put on the release ozone equipment, ozone has a particularly strong impact on all rubber products.
8.The storage room should avoid generating electric or magnetic fields.